Centra tokarskie
Takamaz XC-150
Product Overview
Achieve Space-Saving Comparable to 6-inch Class
The machine width is 1,250mm. The floor space is 1.85m2 , about 23% less than previous model, making it the smallest machine with an 8-inch chuck among the same class in the industry. In our products, the space needed for [2] x [Set of Previous Model & Stocker] is enough for [3] x [Set of XC-150 & Stocker]. Arrangement of lines requiring only small spaces is possible leading to increased efficiency in operation and improvement in manufacturing.
Adoption of Rigid Slide
Just like the other models, the Z-Axis slide applies square box-way slide that is known for rigidity. The X-Axis is designed for increased rigidity than previous model that can be used for heavy cutting.
Energy Saving Machine
As compared with previous models, there are 20% reduction on the spindle inertia and 36% reduction on the spindle acceleration and deceleration time (0-3,500min-1).In addition, X-Axis and Z-Axis have also reduction on the motor load inertia of approximately 8%. Per FEM Analysis for optimizing the design of castings by eliminating unnecessary materials, as compared to previous models, there is a 20% reduction of materials used. This is good for the environment. Through these measures, the power consumption without compromising machine functions and processing performance is reduced by 10%.
Specifications
Item | ability | Unit |
---|---|---|
Chuck size | 8 | inch |
Spindle bearing I.D. | Ø100 | mm |
Spindle speed | Max. 3,500 | min-1 |
Type | 8-station turret | |
Max.stroke | X:175 Z:250 |
mm |
Rapid traverse rate | X:18 Z:24 |
m/min |
Speendle motor | AC 11 / 7.5 | kW |
L × W | 1,250 × 1,480 | mm |
Controller | TAKAMAZ & FANUC |